官网,官方网站,官方网址,吉祥坊五金网,吉祥坊五金网,吉祥坊五金网

| 设为主页 | 保存桌面 | 手机版 | 二维码
普通会员

山东天源机床附件有限公司

机床附件,回转顶尖、合金顶尖、普通顶尖、变径套

产品分类
站内搜索
 
友情链接
  • 暂无链接
您当前的位置:首页 » 供应产品 » OZ25套装铣夹头
OZ25套装铣夹头
点击图片查看原图
产品: 浏览次数:45OZ25套装铣夹头 
品牌: 天鸢
单价: 面议
最小起订量:
供货总量:
发货期限: 自买家付款之日起 3 天内发货
有效期至: 长期有效
最后更新: 2014-10-18 10:14
详细信息
 OZ25套装铣夹头专业生产厂家价格优惠,精度全国最高!! 
ISO30:1.M12 × 1.75PMTB2:1.M10 × 1.5P 2.1/2” –12 2.3/8” –16 3.1/2” –13UNCMTB3:1.M12 × 1.75PISO40:1.M16 × 2.0P 2.M10 × 1.5P 2.5/8” –11 3.1/2” UNCISO50:1.M24 × 3.0P 4.1/2”-13 UNC 2.1–8 5.3/8” –16    MTB4:1.M16 × 2.0PSK40:DIN6987A40 2.5/8” –11 M16 × 2.0MTB5:1.M24 × 3.0PSK50:DIN69871A50 2.M1-8” M24 × 3.0R8:7/16 –20UNFCAT40:5/8” –11   CAT50:1-8”PACKAGE INCLUDING :
每套包括:夹头、本体、包装盒及板手CHUCK , COLLET , WRENCH , BOXMETRIC COLLET SYSTEM SET 公制套装夹头尺寸 , INCH COLLET SYSTEM SET 英制套装夹头尺寸TYPE (锥度)SET PCS 件数ISO307ISO3015ISO407ISO4015ISO507MTB215MTB27MTB315MTB37MTB415MTB47MTB515MTB57R815R87BT4015BT407BT5015BT507SK4015SK407SK5015SK507METRIC RANGE SET SIZE 每套尺寸7 PCS:6,8,10,12,16,20,2515PCS:3,4,5,6,7,8,9,10,11,12,13,16,18,20,25 TYPE (锥度)SET PCS 件数ISO307ISO3015ISO407ISO4015ISO507MTB215MTB27MTB315MTB37MTB415MTB47MTB515MTB57R815R87BT4015BT407BT5015BT507SK4015SK407SK5015SK507METRIC RANGE SET SIZE 每套尺寸7PCS:1/4”,5/16”,3/8”,1/2”,5/8”,3/4”,1”15PCS:1/8”,3/16”,1/4”,5/16”,3/8”,7/16”,1/2”,9/16”5/8”,11/16”,3/4”,13/16”,7/8”,15/16”,1”  


说明:无特殊要求,一般按 II 级供货,如需 I 级,则价格另议。
If no Special requirement, we supply to you according to II grade, If you require I ,the price would be advanceddL径向跳动 Run outIII1.0-1.660.0100.010> 1.6-3.010> 3.0-6.016> 6.0-10.025> 10.0-18.0400.0150.020> 18.0-26.050> 26.0-30.060> 30.0-34.0800.200.030  
压帽与卡簧安装: Mounting instruction for EOC collet and nut  
1、将夹头水平放入压帽内,沿箭头方向用力推动卡簧,即可装入帽内 Put the collet into the nut in level direction, push it into the nut.  
2 、将卡簧与压帽一起安装在夹头体或机床主轴内,把刀具圆柱柄部擦净后装入持孔内,使用扳手均匀用力坚固压帽,直到刀具夹牢为止方可使用(注意:且忌在未安装刀具状态政紧固压帽,以免损坏夹头) Fix the nut and the collet on the spindle rotate the nut until the collet is in pressing. Wipe the straight shank of cutter, and insert it into the pilot hole, Tighten the unt with a wrench till the cutter is clamped heavily.(Caution: never tighten the nut without cutter, in it for it will break) 
3 、换刀时,用扳手松开压帽带出平头及刀具,卸政刀具,沿箭头方向用力推动卡簧,使其退出,然后根据需要换上其他孔径的卡簧即可。 When changing the tool, Loosen the nut and it shall bring out the collet and the cutter together, and then draw the cutter out push out slightly the collet in the offered direction, it shall be ready for any change of the cotter.